The case is manufactured in PETG. It's external measurements are 58.5 x 38.8 x 18.0 mm. It's snap fit with a fingernail-notch to pop it open once shut (or you can use the wire-hole with your thumb).
We recommend inserting the ESP32 by USB port first, getting it aligned with the USB slot in the case, as then it'll fit in correctly. Note there is a notch in the lid to align with the case so that you get the lid on the right way around.
There is a slot for the USB connection, plus a hole in the opposite side in case you want to run wires into it. Our favorite part is the finish... it's almost sparkly and looks brilliant in our humble opinion! Note that the pins are not available directly through the base of the case. If that's important to you, please see our store for the Adaptable Cases.
Please note that these cases only work with modules sporting a Micro USB port.
Attribution
Hobby Stuff used this model as a start point for the case and resized it to fit this specific ESP32 model:
https://www.printables.com/model/104202-esp32-devkitc-v4-box
